MV - Rinsing solution for disassembled watches

MV Rinsing Solution

The MV Rinsing Solution is a water-free professional solution designed to effectively remove all cleaning residues remaining after the use of the MV Cleaning Solution.

This solution dries very quickly and leaves no film on the surface of the components. It is perfectly suited for use in ultrasonic machines or for manual cleaning, placed in the rinsing bath (or auxiliary container).

Type of solution: Light petroleum distillates, free from benzene and chlorinated solvents
Use: Complete rinsing of watch parts after cleaning
Compatible: With all MV cleaning solutions and ultrasonic machines
Drying: Very fast, without greasy residue
Composition:

Stoddard Solvent (mineral spirits regular, hydrocarbons C7–C12, <0.1% benzene): 70–80%
Solvent Naphtha Light Aliphatic (C5–C9): 20–30%

Advantages:

Ultra-fast rinsing without leaving traces or oily film
Compatible with all types of watchmaking materials: steel, brass, jewels, etc.
Ready to use, no dilution required
Immediate drying for a smooth workflow

Risks & precautions for use:

Highly flammable liquid, vapors may irritate eyes, skin and respiratory tract
May dry out the skin or cause burns with prolonged contact
Use in a well-ventilated area with gloves
In case of ingestion or significant inhalation, consult a doctor immediately

Instructions for use:

Apply the MV Rinsing Solution in a separate rinsing container
Immerse cleaned parts, free from excess oil
Leave to act for 3 to 5 minutes (also compatible with ultrasonic machines and rotation/spin)
Remove the parts and wipe off excess solution
Dry immediately with warm air

Available packaging:

50 ml bottle (test or trial)
100 ml bottle (occasional use)
500 ml bottle (professional use)
1000 ml bottle (watchmaking workshop)

Maison advice:

Remember to replace the rinsing bath when deposits or dirt accumulate at the bottom of the container.
For optimal rinsing of your parts, perform a pre-rinse followed by a rinse (2 baths).

Made in France