HORIA - Jewelling tool with micrometric screw, 4.00 mm bore (PO 61-04)
  • HORIA - Jewelling tool with micrometric screw, 4.00 mm bore (PO 61-04)

HORIA - Jewelling tool with micrometric screw, 4.00 mm bore (PO 61-04)

Micrometric screw jewelling tool for setting and removing watch jewels.

  • The spindle and base feature a 4 mm bore.
  • Maximum opening between the base and spindle : 25 mm.
  • Base diameter : Ø 20 mm.

Each accessory is available on request.

Réf : PO 61-04

Made in Switzerland

Micrometric screw jewelling tool for setting and removing watch jewels.

  • The spindle and base feature a 4 mm bore.
  • Maximum opening between the base and spindle : 25 mm.
  • Base diameter : Ø 20 mm.

Each accessory is available on request.

Réf : PO 61-04

Made in Switzerland

  • Brand
  • Reference
    MV13149.1060
  • Condition
    New
  • Country of origin
    Switzerland
Create your account to access pricing and place orders To obtain a part or tool not listed on the site, contact us! Follow our news ! Professionals and resellers: benefit from dedicated pricing after verification of your business act

Comments (0)

16 other products in the same category:


BERGEON – Aluminum Press for Closing Snap-On Case Backs and Removing Crystals (8250)
BERGEON – Aluminum Press for Closing Snap-On Case Backs and Removing Crystals (8250)

HOROTEC - Multi-function tool for opening snap-on case backs, removing bezels and driving out pins (07.119)
HOROTEC - Multi-function tool for opening snap-on case backs, removing bezels and driving out pins (07.119)
  • New

HORIA - Hand-setting press, 4 stakes with standard stop, cast-iron body, hammered finish (PO-53 04)
HORIA - Hand-setting press, 4 stakes with standard stop, cast-iron body, hammered finish (PO-53 04)

HOROTEC – Press for Opening and Closing Screw-Down Case Backs – Accessories Included (07.361)
HOROTEC – Press for Opening and Closing Screw-Down Case Backs – Accessories Included (07.361)

HOROTEC - Assortment of Reversible Screw-On Support Blocks for Snap-On Case Backs, Ø 17 to 45 mm (07.106)
HOROTEC - Assortment of Reversible Screw-On Support Blocks for Snap-On Case Backs, Ø 17 to 45 mm (07.106)

HOROTEC – Stand for pressing/removing pushers and crown tubes, with 7 strips (03.657)
HOROTEC – Stand for pressing/removing pushers and crown tubes, with 7 strips (03.657)

HOROTEC - Tool for fitting and removing watch bracelet pins (10.499)
HOROTEC - Tool for fitting and removing watch bracelet pins (10.499)

BERGEON – Case Opener and Closer for Waterproof Screw-Down Case Backs (5700-Z)
BERGEON – Case Opener and Closer for Waterproof Screw-Down Case Backs (5700-Z)

HOROTEC - Watch case back press for opening/closing screw-down watch cases (07.320)
HOROTEC - Watch case back press for opening/closing screw-down watch cases (07.320)

HOROTEC - Hand setting tool for wristwatches and pocket watches (05.021)
HOROTEC - Hand setting tool for wristwatches and pocket watches (05.021)

HORIA - Lever press for closing watch case backs, made of cast iron (MV13149.1070)
HORIA - Lever press for closing watch case backs, made of cast iron (MV13149.1070)

HORIA - Assortment of dies and spring-loaded pushers for jeweling presses – Ø 3.00 mm (AS 03-03)
HORIA - Assortment of dies and spring-loaded pushers for jeweling presses – Ø 3.00 mm (AS 03-03)

BERGEON – Hand Press with 5 Pushers (8935-5)
BERGEON – Hand Press with 5 Pushers (8935-5)

HOROTEC – Press for closing snap-on case backs with 6 delrin pressing dies (07.110)
HOROTEC – Press for closing snap-on case backs with 6 delrin pressing dies (07.110)

HOROTEC – Press for Installing and Removing Bracelet Pins and Screws (10.500)
HOROTEC – Press for Installing and Removing Bracelet Pins and Screws (10.500)
  • New

HORIA – Hand-setting press, 3 stakes with standard stop, cast-iron body, hammered finish (PO-53)
HORIA – Hand-setting press, 3 stakes with standard stop, cast-iron body, hammered finish (PO-53)